Appendix 17 - Setting-up an LSI Logic Array

1. Select “Configure”
2. Select “Easy Configuration”
3. Press “Space” to select each drive in the array (they should then be displayed as ONLIN A00-00, etc)
4. Press “F10” to configure
5. Press “Space” to select “SPAN-1”, etc
6. Press “F10” to set the RAID level (1 = mirror, 0 = span)
7. Select “Accept”
8. Press “Esc”
9. Select “Save configuration”
10. Press any key
11. Press “Esc” to return to first menu
12. Select “Initialize”
13. Press “Space” to select the drive
14. Press “F10” to initialize
15. Press “Esc”